Fully Automatic Seven-Station Centrifugal Casting Machine for Wet Cylinder

• Customization: Available
• Casting Method: Special Casting
• Casting Form Material: Metal
• Casting Form Usage Count: Permanent
• Surface Treatment: Galvanized
• Surface Roughness: Ra6.3
• Coating: Sodium silicate
• Machining Tolerance: +/-0.01mm
• Standard: AISI
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Color: Customized
• Control Core: PLC
• Trademark: weltop
• Origin: China Shandong
• HS Code: 8454309000

Product Description

The seven-station cylinder liner centrifugal casting production line is used for the centrifugal casting production of large-volume automobile and motorcycle burr cylinder liner, as well as tubular metal castings of similar sizes. The equipment is characterized by high degree of automation, high production efficiency, small area occupation and stable casting quality.

1. There are seven stations in the production line, which are mold spraying station, cleaning station, three pouring stations, picking station and water-cooling station;

2. The production line can produce up to six molds at the same time, and the molds are rotated through the upper conveyor and lower conveyor between the seven stations according to the technological sequence of picking up, cooling, cleaning, spraying and pouring;

3. Equipped with automatic pouring machine to complete the transfer and pouring of molten iron from holding furnace to pouring station. The pouring speed can be adjusted according to the process;

4. Unique full-automatic control system can ensure that the production line can operate as usual when various problems such as castings can not be taken out, unqualified spraying quality and so on occur in the process of mold production. The problematic molds can be rejoined into the production process after the treatment is completed;

5. The spraying device can automatically complete the complex spraying process to ensure the uniformity and stability of the mold coating.

No.	Name	Value	Unit
1	The outer diameter of the casting	Φ70~Φ100	mm
2	Mold length	2000~2100	mm
3	Mold groove diameter	Φ150~Φ175	mm
4	Diameter of riding wheel	Φ250X70	mm
5	Outer gear distance between two riding wheel	1270	mm
6	Center distance between two riding wheel	1200	mm
7	Ground to mold center distance	700	mm
8	Pipe mold speed	0~2400	rpm